Summary: In this article, we will take you through different ways of fixing Windows has stopped this device because it has reported problems (code 43) and bonus tips to recover data lost due to code 43 using Bitwar Data Recovery Software.
There is a wide range of errors that many of us come across at some point in time while using our Windows 7/8/10 and other devices that can be attached to it such as external hard drives, USB flash drive, and SD Card. When an error occurs due to a problem in any of these external devices, the transfer of data becomes restricted, thus; causing panic and frustration as well.
Now, assume a situation wherein you need to transfer an essential piece of data from a pen drive to your work device/computer but, you see that this operation cannot proceed due to the error notification “Windows has stopped this device because it has reported problems“(code 43).
Such situations can lead to huge challenges; therefore, require solutions that will mitigate such errors without causing any harm to the data as such messages ultimately lead to data loss.
Don’t worry and stop asking how do I fix windows has stopped this device code 43! If you ever come across a situation like this where there is a risk of data harm as through this article you will learn various ways of fixing this issue without losing your valuable data.
Table of Contents
Why “Windows Has Stopped This Device Because It Has Reported Problems (code 43)” Error is Caused?
This error message implies the failure of your external storage device. It is detected when one of the drivers that operate your external device informs this failure to the operating system of your computer. This error can be caused in any hardware device; however; it mostly occurs in USB devices and video cards.
Solutions to Overcome Code 43 Error
Solution 1: Update Device Drivers
Sometimes, Windows has stopped this device because it has reported outdated device drives might cause problems (code 43), try with the below steps to update your drivers now.
Step 1. Press Windows Logo key + R and then type devmgmt.msc to launch the Device Manager. The device manager will show the list of all the devices installed on your computer.
Step 2. Select your External device with an error by right-clicking on it and then click on the Update Driver Software option.
Step 3. After this, click on the Search automatically for updated driver software option to update the device drivers.
Solution 2: Roll Back USB Driver
Step 1. Launch the Device Manager by typing device manager in the search box of your computer.
Step 2. From device driver, select your device by right-clicking on it and then select the Properties option.
Step 3. Navigate to the Driver and choose the Roll Back Driver option.
This option is best suited when there was an update of the device driver before the occurrence of error code 43.
Solution 3: Uninstall and Re-install the Device Driver
Step 1. Open Device Manager on your computer system and look for the device with error from the list of devices.
Step 2. Select the device by right-clicking on it and then click on uninstall. Once you get the warning message for installing the device, click OK.
Step 3. Now, select your computer name in Device Manager by right-clicking on it and then choose the option Scan for hardware changes. This will allow the device manager to scan your system and re-install your device automatically.
Step 4. After this, right-click on your device and select the Properties option. Following these steps should let you see the message This device is working properly in the General tab of the Properties dialogue box.
Applying any of the following solutions should be able to fix the device in error.
If you happened to have a USB flash drive that failed to be accessed with this message: Please Insert a Disk into USB Drive, then you can visit directly to the article with 7 solutions to fix the issue there.
And if you have already fixed Windows has stopped this device because it has reported problems (code 43) error, let’s move ahead to check how to recover deleted, formatted, inaccessible, unreadable, virus-infected data or other lost data from USB flash drive using Free Data Recovery Software – Bitwar Data Recovery for Windows.
Recover Data using Bitwar Data Recovery Software
Step 1. Free Download the software and Install it on your system.
Download for PC Download for Mac
Step 2. Launch the recovery software and select the needed device or partition that contains your wanted data.
Step 3. Click Next and choose a scan mode, e.g. Quick Scan.
Step 4. Choose the File types you wish to restore and click on Next.
Step 5. In the final step, you can Preview the selected data or files and then click on Recover to start recovery.
TAKE NOTE: It is recommended not to save data on the same device where you lost it from, therefore Save it somewhere safe on your computer device or any other device.
Bonus Tips:
Sometimes when you insert a USB device to your laptop or a computer, you may come across an error message saying “The last USB device you connected to this computer malfunctioned and Windows does not recognize It.” or “USB Device not Recognized” and so on. Here we also have the 7 solutions for you to overcome the error.
For more about the Windows has stopped this device because it has reported problems (code 43), there are the bonus tips that can do to help.
- Restart your PC
- Update your motherboard’s Bios (Download the updater from your motherboard’s manufacturer, be aware that if you don’t know how to do, ask help from your technical friends).
- Try to Disable the USB device and Enable it again.
- Try with another computer, USB Port, or Operating system.
Quick Fix It!
“Windows has stopped this device because it has reported problems (code 43)” anyone who uses a computer can spot error message and it is caused due to a fault in their external storage device. There are plenty of possible solutions and bonus tips to fix this error.
However, if your data lost due to code 43 error, follow the data recovery steps mentioned above Solutions to retrieve all your essential data with Bitwar Data Recovery Software!