Quick Fix “Windows has stopped this device because it has reported problems (code 43)”?

17
488
4.9
(75)

Summary: In this article, we will take you through different ways of fixing Windows has stopped this device because it has reported problems (code 43) and bonus tips to recover data lost due to code 43 using Bitwar Data Recovery Software.

There is a wide range of errors that many of us come across at some point in time while using our Windows 7/8/10 and other devices that can be attached to it such as external hard drives, USB flash drive, and SD Card. When an error occurs due to a problem in any of these external devices, the transfer of data becomes restricted, thus; causing panic and frustration as well.

Now, assume a situation wherein you need to transfer an essential piece of data from a pen drive to your work device/computer but, you see that this operation cannot proceed due to the error notification “Windows has stopped this device because it has reported problems“(code 43).

Such situations can lead to huge challenges; therefore, require solutions that will mitigate such errors without causing any harm to the data as such messages ultimately lead to data loss.

Windows has stopped this device because it has reported problems (code 43)

Don’t worry and stop asking how do I fix windows has stopped this device code 43! If you ever come across a situation like this where there is a risk of data harm as through this article you will learn various ways of fixing this issue without losing your valuable data.

Why “Windows Has Stopped This Device Because It Has Reported Problems (code 43)” Error is Caused?

This error message implies the failure of your external storage device. It is detected when one of the drivers that operate your external device informs this failure to the operating system of your computer. This error can be caused in any hardware device; however; it mostly occurs in USB devices and video cards.

Solutions to Overcome Code 43 Error

Solution 1: Update Device Drivers

Sometimes, Windows has stopped this device because it has reported outdated device drives might cause problems (code 43), try with the below steps to update your drivers now.

Step 1. Press Windows Logo key + R and then type devmgmt.msc to launch the Device Manager. The device manager will show the list of all the devices installed on your computer.

Step 2. Select your External device with an error by right-clicking on it and then click on the Update Driver Software option.

Update disk drivers' driver

Step 3. After this, click on the Search automatically for updated driver software option to update the device drivers.

Solution 2: Roll Back USB Driver

Step 1Launch the Device Manager by typing device manager in the search box of your computer.

Step 2. From device driver, select your device by right-clicking on it and then select the Properties option.

Step 3. Navigate to the Driver and choose the Roll Back Driver option.

Roll Back Driver

This option is best suited when there was an update of the device driver before the occurrence of error code 43.

Solution 3: Uninstall and Re-install the Device Driver

Step 1. Open Device Manager on your computer system and look for the device with error from the list of devices.

Step 2. Select the device by right-clicking on it and then click on uninstall. Once you get the warning message for installing the device, click OK.

Step 3. Now, select your computer name in Device Manager by right-clicking on it and then choose the option Scan for hardware changes. This will allow the device manager to scan your system and re-install your device automatically.

Scan for hardware changes

Step 4. After this, right-click on your device and select the Properties option. Following these steps should let you see the message This device is working properly in the General tab of the Properties dialogue box.

This device is working properly

Applying any of the following solutions should be able to fix the device in error.

If you happened to have a USB flash drive that failed to be accessed with this message: Please Insert a Disk into USB Drive, then you can visit directly to the article with 7 solutions to fix the issue there.

And if you have already fixed Windows has stopped this device because it has reported problems (code 43) error, let’s move ahead to check how to recover deleted, formatted, inaccessible, unreadable, virus-infected data or other lost data from USB flash drive using Free Data Recovery Software – Bitwar Data Recovery for Windows.

Recover Data using Bitwar Data Recovery Software

Step 1. Free Download the software and Install it on your system.

Download for PC Download for Mac

Step 2. Launch the recovery software and select the needed device or partition that contains your wanted data.

Step 3. Click Next and choose a scan mode, e.g. Quick Scan.

Step 4. Choose the File types you wish to restore and click on Next.

Choose All Types 6.48

Step 5. In the final step, you can Preview the selected data or files and then click on Recover to start recovery.

TAKE NOTE: It is recommended not to save data on the same device where you lost it from, therefore Save it somewhere safe on your computer device or any other device.

Bonus Tips:

Sometimes when you insert a USB device to your laptop or a computer, you may come across an error message saying “The last USB device you connected to this computer malfunctioned and Windows does not recognize It.” or “USB Device not Recognized” and so on. Here we also have the 7 solutions for you to overcome the error.

For more about the Windows has stopped this device because it has reported problems (code 43), there are the bonus tips that can do to help.

  1. Restart your PC
  2. Update your motherboard’s Bios (Download the updater from your motherboard’s manufacturer, be aware that if you don’t know how to do, ask help from your technical friends).
  3. Try to Disable the USB device and Enable it again.
  4. Try with another computer, USB Port, or Operating system.

Quick Fix It!

“Windows has stopped this device because it has reported problems (code 43)” anyone who uses a computer can spot error message and it is caused due to a fault in their external storage device. There are plenty of possible solutions and bonus tips to fix this error.

However, if your data lost due to code 43 error, follow the data recovery steps mentioned above Solutions to retrieve all your essential data with Bitwar Data Recovery Software!

Read More

  1. 4 Solutions to Fix “USB Keeps Disconnecting and Reconnecting”
  2. 5 Best Methods On How to Recover Deleted Hidden Files on Windows
  3. 5 Proven Fixes for DISM failed on Windows Errors
  4. 4 ways to Delete Duplicate Files on Windows
  5. 7 Solutions to the Application Was Unable To Start Correctly Error

Happy with this post?

Click on a star to rate it!

Average rating 4.9 / 5. Vote count: 75

No votes so far! Be the first to rate this post.

We are sorry that this post was not useful for you!

Let us improve this post!

Tell us how we can improve this post?

17 COMMENTS

  1. Found very easy to follow up with the tutorial, complete it very fast with the results I needed, so no error, and no data loss, Great job!

  2. I must say I'm not very patient, my Windows doesn't look like those pictures so I didn't know exactly how to follow those steps, went just for the software which worked great, got the files and format the device, 10 min tips to do it all, 10/10 for Bitwar.

  3. Loved Bitwar, not many words to express my gratitude, but I think the usb drive is just fried so I feel grateful I got to save all the files before the total loss, bless u!

  4. Sadly did the format first, thinking I didn't had important files but well.. Thank you for bringing Bitwar to light, I think recovery data in a formatted device is highly important, so thank you for saving my files!

  5. Didn't imagine the solutions were so easy, great guide, I used the solution 3 with my USB drive, and also installed Bitwar, I even think I found more data than It was, like recover old data deleted maybe? Very happy about the result, thanks!

    • Hi, Gabriel, thanks for your kindly feedback and yes, Bitwar offers three kinds of scan modes, Quick Scan, Deep Scan, and Formatted Recovery, the Quick Scan offers the original file name and folder structure, but sometimes the data lost due to a complex reason, and the Quick Scan may not find your data well, then it's time to use Deep Scan, which is a mode that can scan in each sector of the drive and find more files for you. And the program is able to recover deleted, formatted and lost or inaccessible data from any of the storage devices. However, if you are having any questions while using the program, please contact us. Have a nice day.

  6. Really simple guide, I'm not really a tech person but followed the tutorial step by step and I could repair the USB flash drive very fast and save all the files, I'm glad this error wasn't a big thing, thank you!

  7. So this error has nothing to do with Windows malfunction, right? Even If I tested the drive in a different computer and it was perfectly fine? I used Bitwar to secure my files before doing anything else, so thank you for the help, feel way more secure trying to fix my usb drive having my files copied!

    • Hello, Isabella, try to use the program to retrieve the data as you need is a really a good idea. But to fix the problem you are still needing to follow the above-mentioned solutions. Have a nice day.

  8. I have faced the same error on my PC right after updating my Windows. As I was unable to solve the problem and was looking for the solution. So, I have gone through the Website and I really appreciate your hard work and your blog.

LEAVE A REPLY

Please enter your comment!
Please enter your name here